First, grab the Allen Key No5 from your VanMoof toolbox

1. Remove the seat post:

Remove the rubber cap and use Allen key No.5 to remove the screw (A).

Lift off the seat post completely (B).

Set the screw aside.

2. Replace the old saddle

Use Allen key No.5 to remove the two screws underneath the saddle. Remove the old saddle and attach the new one using the same screws.

3. Place the new saddle into the seat post. 

Put the seat post back into the bike tube at your preferred height (A). Use Allen key №5 and the screw from step 1 to securely attach it, and put the rubber cap on (B).

Old saddles can be brought to the nearest recycling point of choice.