Error 45 indicates that there's an issue with the communication with the motor. Please try the steps below to fix it:
Step 1: Motor cable
Check if the motor cable at the front wheel is properly connected.
Step 2: Firmware
Make sure your bike has the latest firmware installed – you can check this on your app settings screen. If there is a new version available, install it.
Step 3: Reset
Reset your bike: Press and hold the power button on the underside of the top tube for two seconds until you see the reset symbol on the Matrix Display. Press either handlebar button to power the bike on. If the bike is locked, use one of the 3 ways to unlock your bike.
Step 4: System restart
If a reset doesn’t help, you can also try a system restart in the app:
- Make sure you’re connected to the bike and go to the VanMoof app > Garage > Help > System restart. During the system restart, a boat horn will sound and a boat will appear in the Matrix display.
- After the restart, you can wake up your bike with a reset.
Does the error still persist after these steps?
Then it's best if your bike gets checked out by our Bike Doctors. Please book a repair appointment at your nearest VanMoof service location in the VanMoof app, or in your My VanMoof account.