Occasionally, it can be that your bike shows an error code. Regardless of the error code it shows, the error can usually be solved by following the three steps below:

Step 1: Firmware

Make sure your bike has the latest firmware installed – you can check this on your app settings screen. If there is a new version available, install it. 

Step 2: Reset

Reset your bike: Press and hold the power button on the underside of the top tube for two seconds until you see the reset symbol on the Matrix Display. Press either handlebar button to power the bike on. If the bike is locked, use one of the 3 ways to unlock your bike.

Step 3: System restart

If a reset doesn’t help, you can also try a system restart in the app: 
- Make sure you’re connected to the bike and go to the VanMoof app > Garage > Help > System restart. During the system restart, a boat horn will sound and a boat will appear in the Matrix display. 
- After the restart, you can wake up your bike with a reset. 

Does the error still persist after these steps? 
Then it's best if our Bike Doctors check out your bike. Please book a repair appointment at your preferred service location in the VanMoof app, or in your My VanMoof account.